Sean Patrick student testimonial

Sean Patrick student testimonial

Student testimonial – Sean Patrick

Firstly, why did you attend this course? Do you feel it delivered in that area?

I needed the qualification for my associated trade electrical certification. I also do a lot of hot water cylinders and appliance repairs which often call for electricians. It definitely delivered what I needed to qualify in those areas.

What were the highlights of the course?

How Gavin ran it. He knew the trade, he knew what we needed to know, and that’s what he concentrated on. There wasn’t any chaff.

How did the facilitators enhance your learning experience?

There was a lot of interactive learning, and Gavin always asked if we understood stuff. If anyone didn’t understand he’d go back two or three times until we got it.

For the practical training we did, he had good items set up for testing. Items with pre-built faults, so we could work at figuring things out.

I think the course and training was designed to actually help the people who were on it understand the material as easily as possible.

 

Sean Patrick

What will you be able to achieve since taking our course?

The main thing is that I won’t need to bring an electrician in quite as often. Cash-wise, it should probably save me between 25 and 50 thousand dollars per year. And now that I can fault-find on electrical items myself, I can complete the job quickly, which is more convenient for the client.

Would you recommend it?

Yes, definitely.

Finally, how do you see the course helping others? Why?

I do. Basically for the same reasons it helped me. It will enable a plumber to do installations, element replacements and the like, without the need for an outside electrician. Which again, financially makes better sense, and works out more conveniently for everyone.

I’ll just add, I have spoken to plumbers who have done similar courses through other providers, and they haven’t had great experiences. So I consider myself quite lucky to have found E-tec, and have had Gavin as a tutor. Because for me the course delivered absolutely everything I needed.

Leon Nowy student testimonial

Leon Nowy student testimonial

Student testimonial – Leon Nowy

Firstly, why did you attend this course? Do you feel it delivered in that area?

I needed to do a refresher course for my electrical license. E-Tec not only delivered, but actually highly exceeded my expectations. It was an absolutely mind-blowing experience compared to what I have seen elsewhere.

How did this training alleviate a pain point for you?

It essentially provided me with super comfortable surroundings combined with very friendly, exceptionally knowledgeable trainers using the most modern teaching equipment.

What were the highlights of the course?

E-tec’s manager Bill was personally on hand at the door greeting everyone and making sure that we all complied with health and safety regulations due to the Covid-19 situation. He evidently just did it naturally as his team needed help. I found it very impressive and thought to myself, “Wait a second, this place really is different.”

When I came in I immediately noticed a very spacious training facility filled with daylight. A real highlight for me as I have spent many years in fully enclosed production facilities and now my eyes instantly get very irritated when I am under bad lighting.

The facility was perfectly prepared and equipped with the newest training equipment operated by very highly knowledgeable trainers who made the whole course fun and comfortable.

 

Leon Nowy

What did you enjoy about the facilitators?

Absolute professionalism. The level of knowledge of Gavin, Mike and Rachel (the trainers) went well beyond what they were expected to teach us.

From the moment we took our seats Gavin was making sure that we had what we needed and that everyone could see the screens with studying material clearly. He made sure that everyone was comfortable, cracking a good joke when needed.

Mike and Rachel kept going in the same way and frankly, the course was an absolute breeze.

Would you recommend it?

Oh yes! 100%.

Finally, how do you see the course helping others? Why?

With this level of engagement and training the whole course is experienced in such a comfortable and professional environment that everyone feels welcomed and valued. This is wonderful for people attending any course at E-tec. Highly enjoyable!

Vaccination required to attend all in-person training at E-tec under Covid-19 protection framework – Red

Vaccination required to attend all in-person training at E-tec under Covid-19 protection framework – Red

Vaccination required to attend all in-person training at E-tec under Covid-19 protection framework – Red

On Sunday 23 January, Prime Minister Jacinda Ardern announced a nationwide move to the Red Covid-19 traffic light setting from midnight.

Under the Red traffic light setting, E-tec students and visitors must be fully vaccinated to enter the premises at 364 East Tamaki Road.  You will be asked to provide proof of your vaccination status by showing your Vaccine Pass when requested.

Online and virtual training will continue as normal

For courses with an EWRB examination, however, we advise you to contact the exam provider, Aspeq, if you are not fully vaccinated https://ewrb.aspeqexams.com/home prior to course attendance, as Aspeq normally requires proof of full vaccination status.

What else are we doing to keep you safe during the COVID-19 Protection Framework (Red Traffic Light)?

What sort of health and safety requirements can we expect?

Holding in-person training does mean we must have some strict rules in place – and it’s important everyone follows these.

Your arrival on site

      • If you are coming to a pre-arranged class, you’ll need to park at the rear of the building and enter via the rear door. You must wear a face mask at all times whilst inside the building.
      • Please maintain the 2m physical distancing as you enter the building and scan the Covid-19 QR code poster displayed at the entrance.
      • There will be signage directing you to the appropriate area, where you’ll be required to clean your hands with hand sanitiser before signing a Contact Tracing Register.
      • This Register asks you to declare that:
        • you have not been in contact with anyone with Covid-19 symptoms
        • you have no Covid-19 symptoms yourself.
      • The Register will also require your personal contact details, so that the Government can trace you and your contacts in the event of an outbreak.
      • Your tutor will meet you in the designated area and take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols.
      • You must maintain a 1m safe distance from your classmates at all times.
      • Working surfaces and test equipment will be thoroughly cleaned at the start and end of each day. All tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course – at that point, they will need to be thoroughly cleaned before they can be removed.

Additional information

      • E-tec will remain closed to casual visitors. If you’d like to speak to someone about your course or training needs, you can contact admin@etec.test  or 0800 030 500.
      • If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards.
      • Please be aware that other classes may also be operating in the same building at the same time – so you must maintain a safe 2m distance from everyone outside your class as well during the time you are on E-tec premises.

We really appreciate your cooperation in helping us to maintain these health and safety protocols – but it is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately.

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405.

 

Vaccination required to attend all in-person training at E-tec under Covid-19 protection framework – Red

What are we doing to keep you safe during the COVID-19 Protection Framework (Orange Traffic Light)?

What are we doing to keep you safe during the COVID-19 Protection Framework (Orange Traffic Light)?

At Orange, there is no Government vaccination requirement for tertiary education premises.  For courses with an EWRB examination, however, we advise you to contact the exam provider, Aspeq, if you are not fully vaccinated https://ewrb.aspeqexams.com/home prior to course attendance, as Aspeq normally requires proof of full vaccination status.

E-tec will of course be enforcing strict public health measures in accordance with current Government guidelines.

What sort of health and safety requirements can you expect? 

Holding in-person training does mean we must have some strict rules in place – and it’s important everyone follows these.

Your arrival on site

  • If you are coming to a class, you’ll need to park at the rear of the building and enter via the rear door. You must wear a face mask at all times whilst inside the building.
  • Please maintain 2m physical distancing as you enter the building and scan the Covid-19 QR code poster displayed at the entrance.
  • There will be signage directing you to the appropriate area, where you’ll be required to clean your hands with hand sanitiser before signing a Contact Tracing Register.
  • This Register asks you to declare that:
    • you have not been in contact with anyone with Covid-19 symptoms 
    • you have no Covid-19 symptoms yourself. 
  • The Register will also require your personal contact details, so that the Government can trace you and your contacts in the event of an outbreak. 
  • Your tutor will meet you in the designated area and take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols. 
  • You must maintain a 1m safe distance from your classmates at all times. 
  • Working surfaces and test equipment will be thoroughly cleaned at the start and end of each day. All tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course – at that point, they will need to be thoroughly cleaned before they can be removed. 

Additional information

  • If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards. 
  • Please be aware that other classes may also be operating in the same building at the same time – so you must maintain a safe 2m distance from everyone outside your class as well during the time you are on E-tec premises. 

We really appreciate your cooperation in helping us to maintain these health and safety protocols – but it is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately. 

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405. 

 

Vaccination required to attend all in-person training at E-tec under Covid-19 protection framework – Red

What else are we doing to keep you safe during the COVID-19 Protection Framework (Red Traffic Light)?

What else are we doing to keep you safe during the COVID-19 Protection Framework (Red Traffic Light)?

Due to the Government introduction of the COVID-19 Protection Framework (Traffic Light System) and whilst Auckland remains at Red, students and visitors must be fully vaccinated to enter the E-tec premises at 364 East Tamaki Road.  You will be asked to provide proof of your vaccination status by showing your Vaccine Pass when requested.

Online and virtual training will continue as normal.  For EWRB courses, however, we recommend you contact the exam provider, Aspeq, if you are not fully vaccinated https://ewrb.aspeqexams.com/home.

All E-tec tutors and customer service staff involved with in-person training are fully vaccinated.

 

What sort of health and safety requirements can we expect?

Holding in-person training does mean we must have some strict rules in place – and it’s important everyone follows these.

Your arrival on site

      • If you are coming to a pre-arranged class, you’ll need to park at the rear of the building and enter via the rear door. You must wear a face mask at all times whilst inside the building.
      • Please maintain the 2m physical distancing as you enter the building and scan the Covid-19 QR code poster displayed at the entrance.
      • There will be signage directing you to the appropriate area, where you’ll be required to clean your hands with hand sanitiser before signing a Contact Tracing Register.
      • This Register asks you to declare that:
        • you have not been in contact with anyone with Covid-19 symptoms
        • you have no Covid-19 symptoms yourself.
      • The Register will also require your personal contact details, so that the Government can trace you and your contacts in the event of an outbreak.
      • Your tutor will meet you in the designated area and take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols.
      • You must maintain a 1m safe distance from your classmates at all times.
      • Working surfaces and test equipment will be thoroughly cleaned at the start and end of each day. All tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course – at that point, they will need to be thoroughly cleaned before they can be removed.

Additional information

      • E-tec will remain closed to casual visitors. If you’d like to speak to someone about your course or training needs, you can contact admin@etec.test  or 0800 030 500.
      • If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards.
      • Please be aware that other classes may also be operating in the same building at the same time – so you must maintain a safe 2m distance from everyone outside your class as well during the time you are on E-tec premises.

We really appreciate your cooperation in helping us to maintain these health and safety protocols – but it is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately.

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405.