Student testimonial – Leon Nowy

What did you enjoy about the facilitators?

Absolute professionalism. The level of knowledge of Gavin, Mike and Rachel (the trainers) went well beyond what they were expected to teach us.

From the moment we took our seats Gavin was making sure that we had what we needed and that everyone could see the screens with studying material clearly. He made sure that everyone was comfortable, cracking a good joke when needed.

Mike and Rachel kept going in the same way and frankly, the course was an absolute breeze.

Would you recommend it?

Oh yes! 100%.

Finally, how do you see the course helping others? Why?

With this level of engagement and training the whole course is experienced in such a comfortable and professional environment that everyone feels welcomed and valued. This is wonderful for people attending any course at E-tec. Highly enjoyable!

Vaccination required to attend all in-person training at E-tec under Covid-19 protection framework – Red

On Sunday 23 January, Prime Minister Jacinda Ardern announced a nationwide move to the Red Covid-19 traffic light setting from midnight.

Under the Red traffic light setting, E-tec students and visitors must be fully vaccinated to enter the premises at 364 East Tamaki Road.  You will be asked to provide proof of your vaccination status by showing your Vaccine Pass when requested.

Online and virtual training will continue as normal

For courses with an EWRB examination, however, we advise you to contact the exam provider, Aspeq, if you are not fully vaccinated https://ewrb.aspeqexams.com/home prior to course attendance, as Aspeq normally requires proof of full vaccination status.

What else are we doing to keep you safe during the COVID-19 Protection Framework (Red Traffic Light)?

What sort of health and safety requirements can we expect?

Holding in-person training does mean we must have some strict rules in place – and it’s important everyone follows these.

Your arrival on site

• • • If you are coming to a pre-arranged class, you’ll need to park at the rear of the building and enter via the rear door. You must wear a face mask at all times whilst inside the building.
    • Please maintain the 2m physical distancing as you enter the building and scan the Covid-19 QR code poster displayed at the entrance.
    • There will be signage directing you to the appropriate area, where you’ll be required to clean your hands with hand sanitiser before signing a Contact Tracing Register.
    • This Register asks you to declare that:
      • you have not been in contact with anyone with Covid-19 symptoms
      • you have no Covid-19 symptoms yourself.
    • The Register will also require your personal contact details, so that the Government can trace you and your contacts in the event of an outbreak.
    • Your tutor will meet you in the designated area and take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols.
    • You must maintain a 1m safe distance from your classmates at all times.
    • Working surfaces and test equipment will be thoroughly cleaned at the start and end of each day. All tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course – at that point, they will need to be thoroughly cleaned before they can be removed.

Additional information

• • • E-tec will remain closed to casual visitors. If you’d like to speak to someone about your course or training needs, you can contact admin@etec.test  or 0800 030 500.
    • If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards.
    • Please be aware that other classes may also be operating in the same building at the same time – so you must maintain a safe 2m distance from everyone outside your class as well during the time you are on E-tec premises.

We really appreciate your cooperation in helping us to maintain these health and safety protocols – but it is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately.

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405.

What are we doing to keep you safe during the COVID-19 Protection Framework (Orange Traffic Light)?

At Orange, there is no Government vaccination requirement for tertiary education premises.  For courses with an EWRB examination, however, we advise you to contact the exam provider, Aspeq, if you are not fully vaccinated https://ewrb.aspeqexams.com/home prior to course attendance, as Aspeq normally requires proof of full vaccination status.

E-tec will of course be enforcing strict public health measures in accordance with current Government guidelines.

What sort of health and safety requirements can you expect? 

Holding in-person training does mean we must have some strict rules in place – and it’s important everyone follows these.

Your arrival on site

• If you are coming to a class, you’ll need to park at the rear of the building and enter via the rear door. You must wear a face mask at all times whilst inside the building.
• Please maintain 2m physical distancing as you enter the building and scan the Covid-19 QR code poster displayed at the entrance.
• There will be signage directing you to the appropriate area, where you’ll be required to clean your hands with hand sanitiser before signing a Contact Tracing Register.
• This Register asks you to declare that:
  • you have not been in contact with anyone with Covid-19 symptoms 
  • you have no Covid-19 symptoms yourself. 
• The Register will also require your personal contact details, so that the Government can trace you and your contacts in the event of an outbreak. 
• Your tutor will meet you in the designated area and take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols. 
• You must maintain a 1m safe distance from your classmates at all times. 
• Working surfaces and test equipment will be thoroughly cleaned at the start and end of each day. All tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course – at that point, they will need to be thoroughly cleaned before they can be removed. 

Additional information

• If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards. 
• Please be aware that other classes may also be operating in the same building at the same time – so you must maintain a safe 2m distance from everyone outside your class as well during the time you are on E-tec premises. 

We really appreciate your cooperation in helping us to maintain these health and safety protocols – but it is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately. 

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405. 

What else are we doing to keep you safe during the COVID-19 Protection Framework (Red Traffic Light)?

Due to the Government introduction of the COVID-19 Protection Framework (Traffic Light System) and whilst Auckland remains at Red, students and visitors must be fully vaccinated to enter the E-tec premises at 364 East Tamaki Road.  You will be asked to provide proof of your vaccination status by showing your Vaccine Pass when requested.

Online and virtual training will continue as normal.  For EWRB courses, however, we recommend you contact the exam provider, Aspeq, if you are not fully vaccinated https://ewrb.aspeqexams.com/home.

All E-tec tutors and customer service staff involved with in-person training are fully vaccinated.

What sort of health and safety requirements can we expect?

Holding in-person training does mean we must have some strict rules in place – and it’s important everyone follows these.

Your arrival on site

• • • If you are coming to a pre-arranged class, you’ll need to park at the rear of the building and enter via the rear door. You must wear a face mask at all times whilst inside the building.
    • Please maintain the 2m physical distancing as you enter the building and scan the Covid-19 QR code poster displayed at the entrance.
    • There will be signage directing you to the appropriate area, where you’ll be required to clean your hands with hand sanitiser before signing a Contact Tracing Register.
    • This Register asks you to declare that:
      • you have not been in contact with anyone with Covid-19 symptoms
      • you have no Covid-19 symptoms yourself.
    • The Register will also require your personal contact details, so that the Government can trace you and your contacts in the event of an outbreak.
    • Your tutor will meet you in the designated area and take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols.
    • You must maintain a 1m safe distance from your classmates at all times.
    • Working surfaces and test equipment will be thoroughly cleaned at the start and end of each day. All tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course – at that point, they will need to be thoroughly cleaned before they can be removed.

Additional information

• • • E-tec will remain closed to casual visitors. If you’d like to speak to someone about your course or training needs, you can contact admin@etec.test  or 0800 030 500.
    • If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards.
    • Please be aware that other classes may also be operating in the same building at the same time – so you must maintain a safe 2m distance from everyone outside your class as well during the time you are on E-tec premises.

We really appreciate your cooperation in helping us to maintain these health and safety protocols – but it is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately.

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405.

How different is attending E-tec’s Virtual classroom to a face-to-face learning experience?

What should I expect with E-tec’s online classes – what is the format? 

The courses have been designed to keep people engaged and keep learning on-track. You’ll experience a mix of live and interactive classroom presentations, video chats, slide presentations, discussion forums, online chat with screen sharing and replayable video lessons.

You’ll be able to see and hear your course tutors in real time, and ask them questions as they come up. And you’ll definitely get an opportunity to share and discuss topics with other students.

What is an additional bonus of learning online with E-tec?

During live demonstrations, sometimes you may want to have a closer look. During the virtual class, this is possible – you can get a close-up view during demos.

How does the fee compare for E-tec’s virtual or face-to-face courses? 

The costs for virtual and in-person courses is the same, and this fee includes the cost of your external EWRB exam.

What E-tec virtual classes are available now?

·    Electrical Regulations​

·    Electricians Theory​

·    Electrical Installer Theory​

·    Electrical Service Technician (EST) – theory component only, practical component requires face-to-face attendance for one day

How do I register for an E-tec virtual class? 

Signing up is easy. Just choose the course that you’re interested in, and make your booking clicking the enrolment button. Next, when your booking is being processed, you will be asked if you’d prefer to learn in the classroom or virtually.  

If you have any questions or would like to find out more send a message here or call us on 0800 030 500.

​

How E-tec is keeping you safe during Alert Level 3 classes?

What happens when you meet your tutor?

Your tutor will meet you in a designated area to take you through a site induction, provide you with appropriate PPE and explain the safe distancing and hygiene protocols. 

Are there safety requirements through an E-tec class? 

Yes, you must maintain a 1m safe distance from your classmates at all times.  In addition, all tools brought to site must be cleaned using the antiseptic wipes provided before the class commences and should be left on site until the end of your course. At that point, they will need to be thoroughly cleaned before they can be removed.  

What is one thing to remember throughout the entire day while on E-tec premises?

Other classes may also be operating in the same building at the same time as yours, so it’s essential that everyone maintain a safe 2m distance from people outside your class, at all times. 

Can you bring food onsite? 

If you wish to bring food on site, you are welcome to use the spacious E-tec cafeteria for your meals and breaks, provided you keep appropriate social distancing and hygiene standards. We have removed chairs and spaced out the seating and will ensure only one group is allowed in the cafeteria at a time.   

What additional precautions does E-tec take prior to each class? 

All of the working surfaces and test equipment are thoroughly cleaned at the start and end of each day.  

What happens to someone who is not following E-tec’s guidelines? 

We really appreciate everyone’s cooperation in helping us to maintain these health and safety protocols. It is also important to point out that we will need to ask anyone not well, or not adhering to the rules, to leave the site immediately.  

If you become concerned about anyone breaching the rules, or believe a fellow classmate may be unwell, talk to your tutor immediately or contact the manager at E-tec on (027) 777 4405. 

Are you able to enter E-tec as a visitor?  

E-tec is closed to visitors during Level 3. If you’d like to speak to someone about your course or training needs, you can contact admin@etec.test  or 0800 030 500.

From where has E-tec taken safety direction? 

Our COVID-19 Safety Plan has been developed in accordance with WorkSafe, Ministry of health and Ministry of Education guidelines. You can view it here.